|
Brief Introduction of stationary steel car ramp
Stationary steel car ramp is for loading and unloding cargo,it is installed on the platform,building,vehicle decker,for adjusting the height difference of ground and platform,building and vehicle decker. They can reduce a lot of manual works, improving working efficiency and saving time so as to gain greater economic benefit.
Feature
1. The operation is simple,only press the electric panel can control the platform rise and fall.
2.Through the hydraulic power system, with the big cylinder and the small cylinder to realize the platform rises and height adjustment, the platform is made of high quality steel welded tight, long life.
3.The unique design of steel skeleton can bear more pressure, and reduce the skeleton of torque, more rugged than other steel structure durability.
Safety
Surface slip resistant sheet.
The steel car ramp has hydraulic overload protective organization to ensure that equipment will not lift when the load beyond its rated load capacity.
Full-range, telescopic toe protection assures total dock attendant safety.
Parameter of stationary steel car ramp
|
Mdoel
|
Loading
capacity(t)
|
Adjust range(mm)
|
Table size(mm)
|
Overall dimension(mm)
|
Rise/fall power
|
|
SDR-5
|
5
|
up+300 down-250
|
2000×2000
|
2000×2000×600
|
0.75kw
|
|
SDR-6
|
6
|
+300-250
|
2000×2000
|
2000×2000×600
|
|
SDR-8
|
8
|
+300-250
|
2000×2000
|
2000×2000×600
|
|
SDR-10
|
10
|
+300-250
|
2000×2000
|
2000×2000×600
|
|
SDR-12
|
12
|
+300-250
|
2000×2000
|
2000×2000×600
|
|
SDR-15
|
15
|
+300-250
|
2000×2000
|
2000×2000×600
|
Customize
We support customize service,only if you tell us the following detail
1. platform height
2. loading capacity
I will quote you as soon as possible after get the detail information.
Photos
|
